[FUGSPBR] Fw: Inside Windows Product Activation

Alexandre Fernandes alexandre em alexandre.fernandes.nom.br
Qua Jul 11 10:12:07 BRT 2001



Acho que pode interessar...
----- Original Message -----
From: "Steve Gibson" <support em grc.com>
Newsgroups: grc.news,grc.news.feedback
Sent: Tuesday, July 10, 2001 11:13 PM
Subject: Inside Windows Product Activation


http://www.licenturion.com/xp/fully-licensed-wpa.txt



                  Inside Windows Product Activation

                        A Fully Licensed Paper

                              July 2001

   Fully Licensed GmbH, Rudower Chaussee 29, 12489 Berlin, Germany

                      http://www.licenturion.com


 INTRODUCTION

The current public discussion of Windows Product Activation (WPA) is
characterized by uncertainty and speculation. In this paper we supply
the technical details of WPA - as implemented in Windows XP - that
Microsoft should have published long ago.

While we strongly believe that every software vendor has the right to
enforce the licensing terms governing the use of a piece of licensed
software by technical means, we also do believe that each individual
has the right to detailed knowledge about the full implications of
the
employed means and possible limitations imposed by it on software
usage.

In this paper we answer what we think are currently the two most
important open questions related to Windows Product Activation.

  * Exactly what information is transmitted during activation?

  * How do hardware modifications affect an already activated
    installation of Windows XP?

Our answers to these questions are based on Windows XP Release
Candidate 1 (build 2505). Later builds as well as the final version
of
Windows XP might differ from build 2505, e.g. in the employed
cryptographic keys or the layout of some of the data
structures.

However, beyond such minor modifications we expect Microsoft to cling
to the general architecture of their activation mechanism. Thus, we
are convinced that the answers provided by this paper will still be
useful when the final version of Windows XP ships.

This paper supplies in-depth technical information about the inner
workings of WPA. Still, the discussion is a little vague at some
points in order not to facilitate the task of an attacker attempting
to circumvent the license enforcement supplied by the activation
mechanism.

XPDec, a command line utility suitable for verifying the presented
information, can be obtained from http://www.licenturion.com/xp/. It
implements the algorithms presented in this paper. Reading its source
code, which is available from the same location, is highly
recommended.

We have removed an important cryptographic key from the XPDec source
code. Recompiling the source code will thus fail to produce a working
executable. The XPDec executable on our website, however, contains
this key and is fully functional.

So, download the source code to learn about the inner workings of
WPA,
but obtain the executable to experiment with your installation of
Windows XP.

We expect the reader to be familiar with the general procedure of
Windows Product Activation.

 INSIDE THE INSTALLATION ID

We focused our research on product activation via telephone. We did
so, because we expected this variant of activation to be the most
straight-forward to analyze.

The first step in activating Windows XP via telephone is supplying
the
call-center agent with the Installation ID displayed by msoobe.exe,
the application that guides a user through the activation process.
The
Installation ID is a number consisting of 50 decimal digits that are
divided into groups of six digits each, as in

      002666-077894-484890-114573-XXXXXX-XXXXXX-XXXXXX-XXXXXX-XX

In this authentic Installation ID we have substituted digits that we
prefer not to disclose by 'X' characters.

If msoobe.exe is invoked more than once, it provides a different
Installation ID each time.

In return, the call-center agent provides a Confirmation ID matching
the given Installation ID. Entering the Confirmation ID completes the
activation process.

Since the Installation ID is the only piece of information revealed
during activation, the above question concerning the information
transmitted during the activation process is equivalent to the
question

               'How is the Installation ID generated?'

To find an answer to this question, we trace back each digit of the
Installation ID to its origins.

 Check digits

The rightmost digit in each of the groups is a check digit to guard
against simple errors such as the call center agent's mistyping of
one
of the digits read to him or her. The value of the check digit is
calculated by adding the other five digits in the group, adding the
digits at even positions a second time, and dividing the sum by
seven. The remainder of the division is the value of the check
digit. In the above example the check digit for the first group (6)
is
calculated as follows.

         1 | 2 | 3 | 4 | 5  <- position
        ---+---+---+---+---
         0 | 0 | 2 | 6 | 6  <- digits

         0 + 0 + 2 + 6 + 6 = 14       (step 1: add all digits)
             0     + 6     + 14 = 20  (step 2: add even digits again)

     step 3: division
             20 / 7 = 2, remainder is 20 - (2 * 7) = 6

             => check digit is 6

Adding the even digits twice is probably intended to guard against
the
relatively frequent error of accidentally swapping two digits while
typing, as in 00626 vs. 00266, which yield different check digits.

 Decoding

Removing the check digits results in a 41-digit decimal number. A
decimal number of this length roughly corresponds to a 136-bit binary
number. In fact, the 41-digit number is just the decimal encoding of
such a 136-bit multi-precision integer, which is stored in little
endian byte order as a byte array. Hence, the above Installation ID
can also be represented as a sequence of 17 bytes as in

               0xXX 0xXX 0xXX 0xXX 0xXX 0xXX 0xXX 0xXX
               0x94 0xAA 0x46 0xD6 0x0F 0xBD 0x2C 0xC8
               0x00

In this representation of the above Installation ID 'X' characters
again substitute the digits that we prefer not to disclose. The '0x'
prefix denotes hex notation throughout this paper.

 Decryption

When decoding arbitrary Installation IDs it can be noticed that the
most significant byte always seems to be 0x00 or 0x01, whereas the
other bytes look random. The reason for this is that the lower 16
bytes of the Installation ID are encrypted, whereas the most
significant byte is kept in plaintext.

The cryptographic algorithm employed to encrypt the Installation ID
is
a proprietary four-round Feistel cipher. Since the block of input
bytes passed to a Feistel cipher is divided into two blocks of equal
size, this class of ciphers is typically applied to input blocks
consisting of an even number of bytes - in this case the lower 16 of
the 17 input bytes. The round function of the cipher is the SHA-1
message digest algorithm keyed with a four-byte sequence.

Let + denote the concatenation of two byte sequences, ^ the XOR
operation, L and R the left and right eight-byte input half for one
round, L' and R' the output halves of said round, and First-8() a
function that returns the first eight bytes of an SHA-1 message
digest. Then one round of decryption looks as follows.

          L' = R ^ First-8(SHA-1(L + Key))
          R' = L

The result of the decryption is 16 bytes of plaintext, which are -
together with the 17th unencrypted byte - from now on interpreted as
four double words in little endian byte order followed by a single
byte as in

                     name | size        | offset
                     -----+-------------+-------
                      H1  | double word |      0
                      H2  | double word |      4
                      P1  | double word |      8
                      P2  | double word |     12
                      P3  | byte        |     16

H1 and H2 specify the hardware configuration that the Installation ID
is linked to. P1 and P2 as well as the remaining byte P3 contain the
Product ID associated with the Installation ID.

 Product ID

The Product ID consists of five groups of decimal digits, as in

                       AAAAA-BBB-CCCCCCC-DDEEE

If you search your registry for a value named 'ProductID', you will
discover the ID that applies to your installation. The 'About' window
of Internet Explorer should also yield your Product ID.

 Decoding

The mapping between the Product ID in decimal representation and its
binary encoding in the double words P1 and P2 and the byte P3 is
summarized in the following table.

       digits |  length | encoding
      --------+---------+---------------------------------------
        AAAAA | 17 bits | bit  0 to bit 16 of P1
          BBB | 10 bits | bit 17 to bit 26 of P1
      CCCCCCC | 28 bits | bit 27 to bit 31 of P1 (lower  5 bits)
              |         | bit  0 to bit 22 of P2 (upper 23 bits)
        DDEEE | 17 bits | bit 23 to bit 31 of P2 (lower  9 bits)
              |         | bit  0 to bit  7 of P3 (upper  8 bits)

The meaning of each of the five groups of digits is documented in the
next table.

       digits | meaning
      --------+-------------------------------------------------
        AAAAA | apparently always 55034 (in Windows XP RC1)
          BBB | most significant three digits of Raw Product Key
              | (see below)
      CCCCCCC | least significant six digits of Raw Product Key
              | plus check digit (see below)
           DD | index of the public key used to verify the
              | Product Key (see below)
          EEE | random value

As can be seen, the (Raw) Product Key plays an important role in
generating the Product ID.

 Product Key

The Raw Product Key is buried inside the Product Key that is printed
on the sticker distributed with each Windows XP CD. It consists of
five alphanumeric strings separated by '-' characters, where each
string is composed of five characters, as in

                    FFFFF-GGGGG-HHHHH-JJJJJ-KKKKK

Each character is one of the following 24 letters and digits:

           B C D F G H J K M P Q R T V W X Y 2 3 4 6 7 8 9

Very similar to the decimal encoding of the Installation ID the 25
characters of the Product Key form a base-24 encoding of the binary
representation of the Product Key. Decoding the Product Key yields a
multi-precision integer of roughly 115 bits, which is stored - again
in little endian byte order - in an array of 15 bytes. Decoding the
above Product Key results in the following byte sequence.

               0x6F 0xFA 0x95 0x45 0xFC 0x75 0xB5 0x52
               0xBB 0xEF 0xB1 0x17 0xDA 0xCD 0x00

Of these 15 bytes the least significant four bytes contain the Raw
Product Key in little endian byte order. The least significant bit is
removed by shifting this 32-bit value (0x4595FA6F - remember the
little endian byte order) to the left by one bit position, resulting
in a Raw Product Key of 0x22CAFD37, or

                              583728439

in decimal notation.

The eleven remaining bytes form a digital signature, allowing
verification of the authenticity of the Product Key by means of a
hard-coded public key.

 Product Key -> Product ID

The three most significant digits, i.e. 583, of the Raw Product Key's
nine-digit decimal representation directly map to the BBB component
of
the Product ID described above.

To obtain the CCCCCCC component, a check digit is appended to the
remaining six digits 728439. The check digit is chosen such that the
sum of all digits - including the check digit - is divisible by
seven. In the given case, the sum of the six digits is

               7 + 2 + 8 + 4 + 3 + 9     = 33

which results in a check digit of 2, since

               7 + 2 + 8 + 4 + 3 + 9 + 2 = 33 + 2 = 35

which is divisible by seven. The CCCCCCC component of the Product ID
is therefore 7284392.

For verifying a Product Key, more than one public key is available.
If
verification with the first public key fails, the second is tried,
etc. The DD component of the Product ID specifies which of the public
keys in this sequence was successfully used to verify the Product
Key.

This mechanism might be intended to support several different parties
generating valid Product Keys with different individual private keys.

However, the different private keys might also represent different
versions of a product. A Product Key for the 'professional' release
could then be signed with a different key than a Product Key for the
'server' release. The DD component would then represent the product
version.

Finally, a valid Product ID derived from our example Product Key
might
be

                       55034-583-7284392-00123

which indicates that the first public key (DD = index = 0) matched
and
123 was chosen as the random number EEE.

The randomly selected EEE component is the reason for msoobe.exe
presenting a different Installation ID at each invocation. Because of
the applied encryption this small change results in a completely
different Installation ID.

So, the Product ID transmitted during activation will most probably
differ in the last three digits from your Product ID as displayed by
Internet Explorer or as stored in the registry.

 Hardware Information

As discussed above, the hardware configuration linked to the
Installation ID is represented by the two double words H1 and H2.

 Bit-fields

For this purpose, the double words are divided into twelve
bit-fields. The relationship between the computer hardware and the
bit-fields is given in the following table.

    double word | offset | length | bit-field value based on
    ------------+--------+--------+----------------------------
         H1     |      0 |     10 | volume serial number string
                |        |       | of system volume
         H1     |     10 |     10 | network adapter MAC address
                |        |       | string
         H1     |     20 |      7 | CD-ROM drive hardware
                |        |       | identification string
         H1     |     27 |      5 | graphics adapter hardware
                |        |       | identification string
         H2     |      0 |      3 | unused, set to 001
         H2     |      3 |      6 | CPU serial number string
         H2     |      9 |      7 | harddrive hardware
                |        |       | identification string
         H2     |     16 |      5 | SCSI host adapter hardware
                |        |       | identification string
         H2     |     21 |      4 | IDE controller hardware
                |        |       | identification string
         H2     |     25 |      3 | processor model string
         H2     |     28 |      3 | RAM size
         H2     |     31 |      1 | 1 = dockable
                |        |       | 0 = not dockable

Bit 31 of H2 specifies, whether the bit-fields represent a notebook
computer that supports a docking station. If docking is possible, the
activation mechanism will be more tolerant with respect to future
hardware modifications. Here, the idea is that plugging a notebook
into its docking station possibly results in changes to its hardware
configuration, e.g. a SCSI host adapter built into the docking
station
may become available.

Bits 2 through 0 of H2 are unused and always set to 001.

If the hardware component corresponding to one of the remaining ten
bit-fields is present, the respective bit-field contains a non-zero
value describing the component. A value of zero marks the hardware
component as not present.

All hardware components are identified by a hardware identification
string obtained from the registry. Hashing this string provides the
value for the corresponding bit-field.

 Hashing

The hash result is obtained by feeding the hardware identification
string into the MD5 message digest algorithm and picking the number
of
bits required for a bit-field from predetermined locations in the
resulting message digest. Different predetermined locations are used
for different bit-fields. In addition, a hash result of zero is
avoided by calculating

                   Hash = (Hash % BitFieldMax) + 1

where BitFieldMax is the maximal value that may be stored in the
bit-field in question, e.g. 1023 for a 10-bit bit-field, and 'x % y'
denotes the remainder of the division of x by y. This results in
values between 1 and BitFieldMax. The obtained value is then stored
in
the respective bit-field.

 RAM bit-field

The bit-field related to the amount of RAM available to the operating
system is calculated differently. The seven valid values specify the
approximate amount of available RAM as documented in the following
table.

                  value | amount of RAM available
                  ------+---------------------------
                      0 | (bit-field unused)
                      1 | below    32 MB
                      2 | between  32 MB and   63 MB
                      3 | between  64 MB and  127 MB
                      4 | between 128 MB and  255 MB
                      5 | between 256 MB and  511 MB
                      6 | between 512 MB and 1023 MB
                      7 | above              1023 MB

It is important to note that the amount of RAM is retrieved by
calling
the GlobalMemoryStatus() function, which reports a few hundred
kilobytes less than the amount of RAM physically installed. So, 128
MB
of RAM would typically be classified as "between 64 MB and 127 MB".

 Real-world example

Let us have a look at a real-world example. On one of our test
systems
the hardware information consists of the following eight bytes.

               0xC5 0x95 0x12 0xAC 0x01 0x6E 0x2C 0x32

Converting the bytes into H1 and H2, we obtain

                 H1 = 0xAC1295C5 and H2 = 0x322C6E01

Splitting H1 and H2 yields the next table in which we give the value
of each of the bit-fields and the information from which each value
is
derived.

   dw &  |       |
  offset | value | derived from
  -------+-------+-----------------------------------------------
   H1  0 | 0x1C5 | '1234-ABCD'
   H1 10 | 0x0A5 | '00C0DF089E44'
   H1 20 |  0x37 | 'SCSI\CDROMPLEXTOR_CD-ROM_PX-32TS__1.01'
   H1 27 |  0x15 | 'PCI\VEN_102B&DEV_0519&SUBSYS_00000000&REV_01'
   H2  0 |   0x1 | (unused, always 0x1)
   H2  3 |  0x00 | (CPU serial number not present)
   H2  9 |  0x37 | 'SCSI\DISKIBM_____DCAS-34330______S65A'
   H2 16 |  0x0C | 'PCI\VEN_9004&DEV_7178&SUBSYS_00000000&REV_03'
   H2 21 |   0x1 | 'PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01'
   H2 25 |   0x1 | 'GenuineIntel Family 6 Model 3'
   H2 28 |   0x3 | (system has 128 MB of RAM)
   H2 31 |   0x0 | (system is not dockable)

 Using XPDec

XPDec is a utility to be run from the command prompt. It may be
invoked with one of four command line options to carry out one of
four
tasks.

 XPDec -i

This option enables you to access the information hidden in an
Installation ID. It decodes the Installation ID, decrypts it, and
displays the values of the hardware bit-fields as well as the Product
ID of your product. Keep in mind that the last three digits of the
Product ID contained in the Installation ID are randomly selected and
differ from the Product ID displayed by Internet Explorer.

The only argument needed for the '-i' option is the Installation ID,
as in

 XPDec -i 002666-077894-484890-114573-XXXXXX-XXXXXX-XXXXXX-XXXXXX-XX

 XPDec -p

To help you trace the origin of your Product ID, this option decodes
a
Product Key and displays the Raw Product Key as it would be used in a
Product ID.

The only argument needed for the '-p' option is the Product Key, as
in

                XPDec -p FFFFF-GGGGG-HHHHH-JJJJJ-KKKKK

Note that this option does not verify the digital signature of the
Product Key.

 XPDec -v

This option calculates the hash of a given volume serial number. It
was implemented to illustrate our description of string hashing.
First
use '-i' to display the hardware bit-fields. Then use this option to
verify our claims concerning the volume serial number hash.

The only argument needed for the '-v' option is the volume serial
number of your system volume, as in

                          XPDec -v 1234-ABCD

(The volume serial number is part of the 'dir' command's output.)

 XPDec -m

This option calculates the network adapter bit-field value
corresponding to the given MAC address. Similar to '-v' this option
was implemented as a proof of concept.

The only argument needed for the '-m' option is the MAC address of
your network adapter, as in

                      XPDec -m 00-C0-DF-08-9E-44

(Use the 'route print' command to obtain the MAC address of your
network adapter.)

 HARDWARE MODIFICATIONS

When looking at the effects of hardware modifications on an already
activated installation of Windows XP, the file 'wpa.dbl' in the
'system32' directory plays a central role. It is a simple
RC4-encrypted database that stores, among other things like
expiration
information and the Confirmation ID of an activated installation,

  a) the bit-field values representing the current hardware
     configuration,

  and

  b) the bit-field values representing the hardware configuration
     at the time of product activation.

While a) is automatically updated each time the hardware
configuration
is modified in order to reflect the changes, b) remains fixed. Hence,
b) can be thought of as a snapshot of the hardware configuration at
the time of product activation.

This snapshot does not exist in the database before product
activation
and if we compare the size of 'wpa.dbl' before and after activation,
we will notice an increased file size. This is because the snapshot
is
added to the database.

When judging whether re-activation is necessary, the bit-field values
of a) are compared to the bit-field values of b), i.e. the current
hardware configuration is compared to the hardware configuration at
the time of activation.

 Non-dockable computer

Typically all bit-fields with the exception of the unused field and
the 'dockable' field are compared. If more than three of these ten
bit-fields have changed in a) since product activation, re-activation
is required.

This means, for example, that in our above real-world example, we
could replace the harddrive and the CD-ROM drive and substantially
upgrade our RAM without having to re-activate our Windows XP
installation.

However, if we completely re-installed Windows XP, the information in
b) would be lost and we would have to re-activate our installation,
even if we had not changed our hardware.

 Dockable computer

If bit 31 of H2 indicates that our computer supports a docking
station, however, only seven of the ten bit-fields mentioned above
are
compared. The bit-fields corresponding to the SCSI host adapter, the
IDE controller, and the graphics board are omitted. But again, of
these remaining seven bit-fields, only up to three may change without
requiring re-activation.

 CONCLUSIONS

In this paper we have given a technical overview of Windows Product
Activation as implemented in Windows XP. We have shown what
information the data transmitted during product activation is derived
from and how hardware upgrades affect an already activated
installation.

Looking at the technical details of WPA, we do not think that it is
as
problematic as many people have expected. We think so, because WPA is
tolerant with respect to hardware modifications. In addition, it is
likely that more than one hardware component map to a certain value
for a given bit-field. From the above real-world example we know that
the PX-32TS maps to the value 0x37 = 55. But there are probably many
other CD-ROM drives that map to the same value. Hence, it is
impossible to tell from the bit-field value whether it is a PX-32TS
that we are using or one of the other drives that map to the same
value.

In contrast to many critics of Windows Product Activation, we think
that WPA does not prevent typical hardware modifications and,
moreover, respects the user's right to privacy.

 ABOUT THE AUTHORS

Fully Licensed GmbH is a start-up company focusing on novel
approaches
to online software licensing and distribution. Have a look at their
website at

                      http://www.licenturion.com

for more information.

Their research branch every now and then analyzes licensing solutions
implemented by other companies.

 COPYRIGHT

Copyright (C) 2001 Fully Licensed GmbH (www.licenturion.com)
All rights reserved.

You are free to do whatever you want with this paper. However, you
have to supply the URL of its online version

                    http://www.licenturion.com/xp/

with any work derived from this paper to give credit to its authors.

--
_________________________________________________________________
Steve Gibson,               at work on: < a million loose ends >



----
Para sair da lista envie um e-mail para majordomo em fugspbr.org
com as palavras "unsubscribe fugspbr" no corpo da mensagem.



Mais detalhes sobre a lista de discussão freebsd