[FUGSPBR] Como configurar Wireless AVAYA

Ter Nov 5 17:40:29 BRST 2002

 Até agora nao consegui colocar minha AVAYA pra funcionar....

Quem puder me ajudar eu agradeço,

Abaixo está o dmesg da minha maquina, e o rc.conf.

Pelo que sei, o cartao tem que acender um led qdo está funcionando
corretamente e até no momento esse cara nao acende.

Já alterei todos os IRQ possiveis no pccard_flags com o parametro -i, mesmo
assim foi insuficiente.

Grato,

dmesg:

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Mon Jan 28 14:31:56 GMT 2002
    murray em builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (267.27-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x634  Stepping = 4

Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,M
MX>
real memory  = 67108864 (65536K bytes)
avail memory = 60649472 (59228K bytes)
Preloaded elf kernel "kernel" at 0xc0496000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00f83b0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 4.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdf00-0xdf1f irq 9 at
device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x5f00-0x5f0f at
device 4.3 on pci0
pci0: <Trident model 9660 VGA-compatible display device> at 9.0 irq 0
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: 0:10 INTA routed to irq 3
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 3 at device 10.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [pwr save][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem
0xefbdff00-0xefbdffff irq 10 at device 11.0 on pci0
rl0: Ethernet address: 00:48:54:3d:35:89
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 3079MB <QUANTUM FIREBALL SE3.2A> [6256/16/63] at ata0-master UDMA33
acd0: CD-RW <HL-DT-ST CD-RW GCE-8240B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 3 slot 0 on pccard0
wi0: Ethernet address: 00:02:2d:2d:8f:76
wi0: watchdog timeout

rc.conf

# -- sysinstall generated deltas -- # Tue Nov  5 10:37:39 2002
# Created: Tue Nov  5 10:37:39 2002
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
gateway_enable="YES"
inetd_enable="YES"
kern_securelevel_enable="NO"
linux_enable="YES"
moused_enable="YES"
moused_port="/dev/cuaa0"
nfs_reserved_port_only="YES"
pccard_enable="YES"
#pccard_mem="0xd8000"
pccardd_flags="-z 30"
ifconfig_wi0="inet 192.168.1.15 netmask 255.255.255.0 ssid minharede
stationname asr"
ifconfig_rl0="inet 10.12.100.1 netmask 255.255.255.0"
sendmail_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
hostname="Denis"

_______________________________________________________________
Sair da Lista: http://www2.fugspbr.org/mailman/listinfo/fugspbr
Historico: http://www4.fugspbr.org/lista/html/FUG-BR/