[FUGSPBR] Freebsd 5.1 Fatal Trap 12: page fault
Ricardo A. Reis
ricardo_bsd em yahoo.com.br
Dom Ago 17 20:34:54 BRT 2003
Caros Amigos,
Ja faz algum tempo que nao passo por apuros com Free,
mais como pra tudo tem uma fez e normalmente as coisas
acontecem novamente estou com um problema muito
estranho, recentemente adquiri uma unidade de gravacao
de cd, LG 52x24x52x nao tive problema algum quanto ao
suporte e gravacao.
Recompilei meu kernel com suporte a
scsi-emultation e assim usar o
cdrecord, so que por considencia a maquina tomou de
uma instabilidade
inesperada era so comecar usar muito da maquina que
esta congelava e em
seguida rebootava :-( .... Isso me chamou muito a
atencao porque como o
free e tido por sua estabilidade como ja pude provar
em ambientes de
producao !!! esta ai a pergunta o que pode estar
acontecendo?
Como eu estava no ambiente grafico nada podia
ver, resolvi ficar
procurando por considencias, tentei bootar com meu
kernel generico e qual
nao foi a surpresa quando o sh nao pode ser iniciado
por signal 12!!!
Signal 12 seria problema de memoria? tentei
deixar a maquina
ligada sem atividade aparente, nao travou mais tanto
que estou escutando
musica e usando pine e openoffice como seria problema
de memoria ?? tentei
tirar todos os pente e alternar e a maquina sempre faz
a mesma coisa, ao
tentar recompilar meu kernel "tanto o atual e o
generico apos um cvsup" me
foi postado a sequinte mensagem.
-----------------------------------------------
Fatal Trap 12: page fault
while in kernel mode
Fault Virtual address = 0x0
Fault Code = supervisor read, page no
present
Instruction Pointer = 0x8:0x0
Stack Pointer = 0x10:0xcd2fdb88
Frame Pointer = 0x10:0xcd2fdb88
Code Segment = base 0x0,limit 0xfffff, type
0x1b, DPL0, jress
1 , def 321, gren 1
Processor eflags = interrupt enabled, resume , IOPL =
0
PANIC: PAGE FAULT
------------------------------------------------
DMESG:
35:32 BRT 2003
root em daemon.homeunix.org:/usr/src/sys/i386/compile/DAEMON
Preloaded elf kernel "/boot/kernel/kernel" at
0xc044a000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at
0xc044a200.
Preloaded splash_image_data "/boot/obi_chuck.bmp" at
0xc044a2b0.
Preloaded elf module "/boot/kernel/snd_es137x.ko" at
0xc044a300.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at
0xc044a3b0.
Calibrating clock(s) ... i8254 clock: 1193280 Hz
CLK_USE_I8254_CALIBRATION not specified - using
default frequency
Timecounter "i8254" frequency 1193182 Hz
Calibrating TSC clock ... TSC clock: 400911658 Hz
Timecounter "TSC" frequency 400911658 Hz
CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class
CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag,
2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2
lines/tag, 2-way associative
Write Allocate Enable Limit: 256M bytes
Write Allocate 15-16M bytes: Enable
real memory = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes
(159 pages)
0x0000000000471000 - 0x000000000fb49fff, 258838528
bytes (63193 pages)
avail memory = 255741952 (243 MB)
bios32: Found BIOS32 Service Directory header at
0xc00fadf0
bios32: Entry = 0xfb270 (c00fb270) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb420
pnpbios: Found PnP BIOS data at 0xc00fc050
pnpbios: Entry = f0000:c078 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
K6-family MTRR support enabled (2 registers)
VESA: information block
56 45 53 41 00 02 00 0e 00 c0 00 00 00 00 3b 0e
00 c0 40 00 01 01 18 0e 00 c0 29 0e 00 c0 33 0e
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 57 mode(s) found
VESA: v2.0, 4096k memory, flags:0x0, mode
table:0xc00c0e3b (c0000e3b)
VESA: S3 Incorporated. 86C357
VESA: S3 Incorporated. Virge GX2 Rev B
random: <entropy source>
splash: image em 0xc03da354, size:308278
bmp_start(): splash_mode:257
splash: image decoder found: splash_bmp
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is
0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is
there (id=05971106)
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdf10
PCI-Only Interrupts: 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14
15
slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14
15
slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14
15
slot 1 0 8 D 0x05 3 4 5 7 9 10 11 12 14
15
slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14
15
slot 2 0 9 B 0x03 3 4 5 7 9 10 11 12 14
15
slot 2 0 9 C 0x05 3 4 5 7 9 10 11 12 14
15
slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14
15
slot 3 0 10 A 0x03 3 4 5 7 9 10 11 12 14
15
slot 3 0 10 B 0x05 3 4 5 7 9 10 11 12 14
15
slot 3 0 10 C 0x01 3 4 5 7 9 10 11 12 14
15
slot 3 0 10 D 0x02 3 4 5 7 9 10 11 12 14
15
slot 4 0 11 A 0x05 3 4 5 7 9 10 11 12 14
15
slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14
15
slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14
15
slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14
15
slot 5 0 12 A 0x03 3 4 5 7 9 10 11 12 14
15
slot 5 0 12 B 0x05 3 4 5 7 9 10 11 12 14
15
slot 5 0 12 C 0x01 3 4 5 7 9 10 11 12 14
15
slot 5 0 12 D 0x02 3 4 5 7 9 10 11 12 14
15
embedded 0 7 A 0x01 3 4 5 7 9 10 11 12 14
15
embedded 0 7 B 0x02 3 4 5 7 9 10 11 12 14
15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14
15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14
15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14
15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14
15
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size
26, enabled
found-> vendor=0x1106, dev=0x0597, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0
(dwords)
lattimer=0x10 (480 ns), mingnt=0x00 (0 ns),
maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2220, cachelnsz=0
(dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns),
maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0596, revid=0x12
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x008f, statreg=0x0200, cachelnsz=0
(dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000d000, size
4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0
(dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns),
maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3050, revid=0x20
bus=0, slot=7, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0
(dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000d800, size
6, enabled
found-> vendor=0x1274, dev=0x5000, revid=0x01
bus=0, slot=8, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0105, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000
ns), maxlat=0x80 (32000 ns)
intpin=a, irq=11
map[10]: type 3, range 32, base ed100000, size
12, enabled
map[14]: type 4, range 32, base 0000dc00, size
5, enabled
map[18]: type 1, range 32, base ed000000, size
20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x05
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8
(dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000
ns), maxlat=0x38 (14000 ns)
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e000, size
8, enabled
map[14]: type 1, range 32, base ed101000, size
8, enabled
found-> vendor=0x1106, dev=0x3106, revid=0x85
bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8
(dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns),
maxlat=0x08 (2000 ns)
intpin=a, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <VIA 82C597 (Apollo VP3) host to PCI bridge> mem
0xe8000000-0xebffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xe0000000-0xe7ffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base e0000000, size
26, enabled
found-> vendor=0x5333, dev=0x8a10, revid=0x04
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0
(dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000
ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
pci1: <display, VGA> at device 0.0 (no driver
attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B UDMA66 controller> port
0xd000-0xd00f at device 7.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=50
ata0-slave: ATAPI 00 00
ata0-master: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=50
ata0-master: ATA 01 a5
ata0-slave: ATA 01 a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: after reset mask=03 stat0=10 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, HOST-PCI> at device 7.3 (no driver
attached)
pcm0: <AudioPCI ES1370> port 0xd800-0xd83f irq 11 at
device 8.0 on pci0
pcm0: sndbuf_setmap 5be000, 1000; 0xc260a000 -> 5be000
pcm0: sndbuf_setmap 5bb000, 1000; 0xc2627000 -> 5bb000
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B)
Ethernet> port 0xdc00-0xdc1f mem
0xed000000-0xed0fffff,0xed100000-0xed100fff irq 10
at device 9.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:04:ac:66:1d:d5
fxp0: PCI IDs: 8086 1229 1014 005c 0005
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
fxp0: bpf attached
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port
0xe000-0xe0ff mem 0xed101000-0xed1010ff irq 12 at
device 10.0 on pci0
vr0: Ethernet address: 00:40:f4:5f:1c:1b
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on
miibus1
ukphy0: OUI 0x004063, model 0x0034, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
vr0: bpf attached
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 13 devices, largest 98 bytes
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff,
size=0xa0000
PNP0c01: adding fixed memory32 range
0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range
0x100000-0xfffffff, size=0xff00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff,
size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff,
size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfffff,
size=0x8000
PNP0c02: adding fixed memory32 range 0xca000-0xcbfff,
size=0x2000
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x294-0x297, size=0x4,
align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2,
align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8,
align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10,
align=0
PNP0a03: adding io range 0x4000-0x407f, size=0x80,
align=0
PNP0a03: adding io range 0x4080-0x40ff, size=0x80,
align=0
PNP0a03: adding io range 0x5000-0x501f, size=0x20,
align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8,
align=0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4,
align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 13 device ID PNP0700 (0007d041)
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8,
align=0
PNP0401: adding io range 0x778-0x77a, size=0x3,
align=0
pnpbios: handle 15 device ID PNP0401 (0104d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port
0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1,
flags:0x3d0000
psm0: current command byte:0067
psm0: failed to reset the aux device.
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10
on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or
clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10
on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5
on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on
isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on
isa0
pcic1: not probed (disabled)
pmtimer0 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in
COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
VESA: set_mode(): 24(18) -> 257(101)
VESA: about to set a VESA mode...
VESA: mode set!
vesa_set_mode(): vi_width:640, len:640, line_width:640
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons
terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:257
fb0: window:0xd1dd6000 size:4096k gran:4096k,
buf:0xd1dd6000 size:4096k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on
isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
Device configuration finished.
linprocfs registered
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
Linux ELF exec handler installed
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: success setting UDMA33 on VIA 82C596B chip
ad0: <QUANTUM FIREBALLlct10 15/A03.0900> ATA-4 disk at
ata0-master
ad0: 14324MB (29336832 sectors), 29104 C, 16 H, 63 S,
512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=12 dmamode=34 udmamode=68 cblid=0
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad1: success setting UDMA33 on VIA 82C596B chip
ad1: <QUANTUM FIREBALL ST3.2A/A0F.0800> ATA-3 disk at
ata0-slave
ad1: 3079MB (6306048 sectors), 6256 C, 16 H, 63 S, 512
B
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=12 dmamode=34 udmamode=66 cblid=0
ar: FreeBSD check1 failed
ata1-master: piomode=12 dmamode=34 udmamode=66
dmaflag=1
ata1-master: success setting UDMA33 on VIA 82C596B
chip
acd0: <HL-DT-ST GCE-8523B/1.01> CD-RW drive at ata1 as
master
acd0: read 6890KB/s (53034KB/s) write 8957KB/s
(8957KB/s), 2048KB buffer, UDMA33
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1-slave: piomode=12 dmamode=34 udmamode=66
dmaflag=1
ata1-slave: success setting UDMA33 on VIA 82C596B chip
acd1: <LG DVD-ROM DRD-8160B/1.01> DVD-ROM drive at
ata1 as slave
acd1: read 1031KB/s (32KB/s), 512KB buffer, UDMA33
acd1: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM,
DVD-R, packet
acd1: Writes:
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: 120mm data disc
[0] f:00 typ:11 s(CHS):0/1/1 e(CHS):652/11/63 s:63
l:10475073
[1] f:80 typ:165 s(CHS):652/12/1 e(CHS):1023/254/63
s:10475136 l:18859554
[2] f:00 typ:0 s(CHS):1022/254/63 e(CHS):1022/254/63
s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 5363237376
end 5363269631
GEOM: Configure ad0s2, start 5363269632 length
9656091648 end 15019361279
GEOM: new disk ad1
GEOM: Configure ad0s2a, start 402653184 length
9253438464 end 9656091647
GEOM: Configure ad0s2b, start 0 length 268435456 end
268435455
GEOM: Configure ad0s2c, start 0 length 9656091648 end
9656091647
GEOM: Configure ad0s2e, start 268435456 length
134217728 end 402653183
[0] f:80 typ:11 s(CHS):1/129/1 e(CHS):392/135/63
s:24192 l:6281856
[1] f:00 typ:0 s(CHS):1022/254/63 e(CHS):1022/254/63
s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 12386304 length
3216310272 end 3228696575
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 6
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 5
(probe0:ata0:0:0:0): Retries Exhausted
(probe1:ata0:0:1:0): error 5
(probe1:ata0:0:1:0): Retries Exhausted
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 5
(probe0:ata0:0:0:0): Retries Exhausted
(probe1:ata0:0:1:0): error 5
(probe1:ata0:0:1:0): Retries Exhausted
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <HL-DT-ST CD-RW GCE-8523B 1.01> Removable
CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
pass1 at ata1 bus 0 target 1 lun 0
pass1: <LG DVD-ROM DRD8160B 1.01> Removable CD-ROM
SCSI-0 device
pass1: 33.000MB/s transfers
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST CD-RW GCE-8523B 1.01> Removable CD-ROM
SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY,
Medium not present - tray closed
cd1 at ata1 bus 0 target 1 lun 0
cd1: <LG DVD-ROM DRD8160B 1.01> Removable CD-ROM
SCSI-0 device
cd1: 33.000MB/s transfers
cd1: cd present [2082576 x 2048 byte records]
VESA: set_mode(): 257(101) -> 24(18)
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
WARNING: /tmp was not properly dismounted
tun0: bpf attached
warning: KLD '/boot/kernel/netgraph.ko' is newer than
the linker.hints file
warning: KLD '/boot/kernel/ng_ether.ko' is newer than
the linker.hints file
warning: KLD '/boot/kernel/ipfw.ko' is newer than the
linker.hints file
ipfw2 initialized, divert disabled, rule-based
forwarding enabled, default to deny, logging disabled
KERNEL
machine i386
cpu I586_CPU
options CPU_WT_ALLOC
options NO_MEMORY_HOLE
ident DAEMON
#options SCHED_4BSD #4BSD
scheduler
options SCHED_ULE
options INET
#InterNETworking
options INET6 #IPv6
communications protocols
options FFS #Berkeley Fast
Filesystem
options SOFTUPDATES #Enable FFS
soft updates support
options UFS_ACL #Support for
access control lists
options UFS_DIRHASH #Improve
performance on big directories
options PROCFS #Process
filesystem (requires PSEUDOFS)
options PSEUDOFS
#Pseudo-filesystem framework
options COMPAT_43 #Compatible
with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible
with FreeBSD4
options KTRACE #ktrace(1)
support
options SYSVSHM #SYSV-style
shared memory
options SYSVMSG #SYSV-style
message queues
options SYSVSEM #SYSV-style
semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix
P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a
CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print
register bitfields in debug
# output.
Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print
register bitfields in debug
# output.
Adds ~215k to driver.
device isa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk
drives
device atapicd # ATAPI CDROM
drives
options ATA_STATIC_ID #Static device
numbering
# atkbdc0 controls both the keyboard and the PS/2
mouse
device atkbdc # AT keyboard
controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card
driver
device agp # support several AGP
chipsets
device splash # Splash screen and
screen saver support
# syscons is the default console driver, resembling an
SCO console
device sc
# Floating point support - do not disable.
device npx
# Add suspend/resume support for the i8254.
device pmtimer
# Serial (COM) ports
device sio # 8250, 16[45]50 based
serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus
(required)
device lpt # Printer
# PCI Ethernet NICs that use the common MII bus
controller code.
# NOTE: Be sure to keep the 'device miibus' line in
order to use these NICs!
device miibus # MII bus support
device fxp # Intel EtherExpress
PRO/100B (82557, 82558)
device vr # VIA Rhine, Rhine II
# Pseudo devices - the number indicates how many units
to allocate.
device random # Entropy device
device loop # Network loopback
devicdevice tun # Packet tunnel.
device pty # Pseudo-ttys (telnet
etc)
device gif # IPv6 and IPv4
tunneling
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of
enabling this!
device bpf # Berkeley packet
filter
options VESA
options VESA_DEBUG
options COMPAT_LINUX
options LINPROCFS
options PECOFF_SUPPORT
options PECOFF_DEBUG
options GEOM_BSD # BSD
disklabels
options IPSTEALTH
options RANDOM_IP_ID
options ACCEPT_FILTER_DATA
options ACCEPT_FILTER_HTTP
options TCP_DROP_SYNFIN
options SC_DISABLE_DDBKEY
options SC_HISTORY_SIZE=2000
options SC_PIXEL_MODE
options VGA_WIDTH90
options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
options
SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
device atapicam
device scbus
device cd
device pass
device md # Memory "disks"
Bom desculpe pelo tamanho do email,
mais informacao nunca
e' demais:-)
Atenciosamente Soulofblack
e ether # Ethernet support
_______________________________________________________________________
Yahoo! Mail
Mais espaço, mais segurança e gratuito: caixa postal de 6MB, antivírus, proteção contra spam.
http://br.mail.yahoo.com/
_______________________________________________________________
Sair da Lista: http://www2.fugspbr.org/mailman/listinfo/fugspbr
Historico: http://www4.fugspbr.org/lista/html/FUG-BR/
Mais detalhes sobre a lista de discussão freebsd