[FUG-BR] RES: OT: dica para hardware de servidor
Paulo Henrique BSD Brasil
paulo.rddck em bsd.com.br
Segunda Fevereiro 14 12:20:37 BRST 2011
Então Renato, infelizmente meu conhecimento é um pouco limitado sobre
tais hardware, a unica forma que sei identificar a questão de
Dual-NorthBridge é através da constatação de Dois Dissipadores de igual
tamanho proximo cada um de um dos bancos de memoria e um terceiro
dissipador de menor tamanho proximo das portas sata/pci.
Na descrição do componente tambem existe a referencia quanto a ser dual
northbirdge ou não.
No caso da Supermicro a seguinte descrição constata que a placa é dual
northbridge ( 2. Dual Intel® 5520 (Tylersburg) Chipsets ).
Ja no caso da Dell, não da para saber nem qual o modelo do chip das NICs
com precisão, sou muito pé atraz com esses hardware de caixa por causa
disso.
A chance de haver alguma incompatibilidade é muito grande.
Se ao abrir o servidor a placa-mãe possuir tres dissipadores de tamanho
avantajado e dois deles forem de igual tamanho e proximo dos bancos de
memoria, então a placa-mãe é dual NorthBridge.
Att.
Em 14/2/2011 10:18, Renato Frederick escreveu:
> Segue um dmesg de um r710, se ajudar vocês a detectar a questão de
> northbridge:
>
> Copyright (c) 1992-2010 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.1-STABLE #2: Sun Oct 24 01:54:50 BRST 2010
> root em XXXXXXXX:/usr/src/sys/amd64/compile/FIREWALL amd64
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.01-MHz K8-class
> CPU)
> Origin = "GenuineIntel" Id = 0x206c2 Family = 6 Model = 2c Stepping =
> 2
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b17>,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
> AMD Features2=0x1<LAHF>
> TSC: P-state invariant
> real memory = 4294967296 (4096 MB)
> avail memory = 4101509120 (3911 MB)
> ACPI APIC Table:<DELL PE_SC3>
> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
> FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
> cpu0 (BSP): APIC ID: 32
> cpu1 (AP): APIC ID: 33
> cpu2 (AP): APIC ID: 34
> cpu3 (AP): APIC ID: 35
> cpu4 (AP): APIC ID: 50
> cpu5 (AP): APIC ID: 51
> cpu6 (AP): APIC ID: 52
> cpu7 (AP): APIC ID: 53
> ioapic1: Changing APIC ID to 1
> ioapic0<Version 2.0> irqs 0-23 on motherboard
> ioapic1<Version 2.0> irqs 32-55 on motherboard
> kbd1 at kbdmux0
> cryptosoft0:<software crypto> on motherboard
> acpi0:<DELL PE_SC3> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0:<24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0:<ACPI CPU> on acpi0
> cpu1:<ACPI CPU> on acpi0
> cpu2:<ACPI CPU> on acpi0
> cpu3:<ACPI CPU> on acpi0
> cpu4:<ACPI CPU> on acpi0
> cpu5:<ACPI CPU> on acpi0
> cpu6:<ACPI CPU> on acpi0
> cpu7:<ACPI CPU> on acpi0
> acpi_hpet0:<High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> pcib0:<ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0:<ACPI PCI bus> on pcib0
> pcib1:<ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1:<ACPI PCI bus> on pcib1
> bce0:<Broadcom NetXtreme II BCM5716 1000Base-T (C0)> mem
> 0xda000000-0xdbffffff irq 36 at device 0.0 on pci1
> miibus0:<MII bus> on bce0
> brgphy0:<BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bce0: Ethernet address: 84:2b:2b:4d:33:aa
> bce0: [ITHREAD]
> bce1:<Broadcom NetXtreme II BCM5716 1000Base-T (C0)> mem
> 0xdc000000-0xddffffff irq 48 at device 0.1 on pci1
> miibus1:<MII bus> on bce1
> brgphy1:<BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus1
> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> bce1: Ethernet address: 84:2b:2b:4d:33:ab
> bce1: [ITHREAD]
> pcib2:<ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci2:<ACPI PCI bus> on pcib2
> mpt0:<LSILogic SAS/SATA Adapter> port 0xfc00-0xfcff mem
> 0xdfeec000-0xdfeeffff,0xdfef0000-0xdfefffff irq 32 at device 0.0 on pci2
> mpt0: [ITHREAD]
> mpt0: MPI Version=1.5.18.0
> mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
> mpt0: 1 Active Volume (2 Max)
> mpt0: 3 Hidden Drive Members (14 Max)
> pcib3:<ACPI PCI-PCI bridge> at device 7.0 on pci0
> pci3:<ACPI PCI bus> on pcib3
> igb0:<Intel(R) PRO/1000 Network Connection version - 2.0.1> port
> 0xecc0-0xecdf mem
> 0xdf3c0000-0xdf3dffff,0xdf400000-0xdf7fffff,0xdf3b8000-0xdf3bbfff irq 38 at
> device 0.0 on pci3
> igb0: Using MSIX interrupts with 9 vectors
> igb0: [ITHREAD]
> igb0: [ITHREAD]
> igb0: [ITHREAD]
> igb0: [ITHREAD]
> igb0: [ITHREAD]
> igb0: [ITHREAD]
> igb0: [ITHREAD]
> igb0: [ITHREAD]
> igb0: [ITHREAD]
> igb0: Ethernet address: 00:1b:21:69:6a:98
> igb1:<Intel(R) PRO/1000 Network Connection version - 2.0.1> port
> 0xece0-0xecff mem
> 0xdf3e0000-0xdf3fffff,0xdf800000-0xdfbfffff,0xdf3bc000-0xdf3bffff irq 45 at
> device 0.1 on pci3
> igb1: Using MSIX interrupts with 9 vectors
> igb1: [ITHREAD]
> igb1: [ITHREAD]
> igb1: [ITHREAD]
> igb1: [ITHREAD]
> igb1: [ITHREAD]
> igb1: [ITHREAD]
> igb1: [ITHREAD]
> igb1: [ITHREAD]
> igb1: [ITHREAD]
> igb1: Ethernet address: 00:1b:21:69:6a:99
> pci0:<base peripheral, interrupt controller> at device 20.0 (no driver
> attached)
> pci0:<base peripheral, interrupt controller> at device 20.1 (no driver
> attached)
> pci0:<base peripheral, interrupt controller> at device 20.2 (no driver
> attached)
> uhci0:<Intel 82801JI (ICH10) USB controller USB-D> port 0xdc40-0xdc5f irq
> 17 at device 26.0 on pci0
> uhci0: [ITHREAD]
> usbus0:<Intel 82801JI (ICH10) USB controller USB-D> on uhci0
> uhci1:<Intel 82801JI (ICH10) USB controller USB-E> port 0xdc60-0xdc7f irq
> 18 at device 26.1 on pci0
> uhci1: [ITHREAD]
> usbus1:<Intel 82801JI (ICH10) USB controller USB-E> on uhci1
> ehci0:<Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem
> 0xdfcff800-0xdfcffbff irq 19 at device 26.7 on pci0
> ehci0: [ITHREAD]
> usbus2: EHCI version 1.0
> usbus2:<Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
> uhci2:<Intel 82801JI (ICH10) USB controller USB-A> port 0xdc80-0xdc9f irq
> 21 at device 29.0 on pci0
> uhci2: [ITHREAD]
> usbus3:<Intel 82801JI (ICH10) USB controller USB-A> on uhci2
> uhci3:<Intel 82801JI (ICH10) USB controller USB-B> port 0xdca0-0xdcbf irq
> 20 at device 29.1 on pci0
> uhci3: [ITHREAD]
> usbus4:<Intel 82801JI (ICH10) USB controller USB-B> on uhci3
> uhci4:<Intel 82801JI (ICH10) USB controller USB-C> port 0xdcc0-0xdcdf irq
> 21 at device 29.2 on pci0
> uhci4: [ITHREAD]
> usbus5:<Intel 82801JI (ICH10) USB controller USB-C> on uhci4
> uhci5:<Intel 82801JI (ICH10) USB controller USB-F> port 0xdce0-0xdcff irq
> 20 at device 29.3 on pci0
> uhci5: [ITHREAD]
> usbus6:<Intel 82801JI (ICH10) USB controller USB-F> on uhci5
> ehci1:<Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem
> 0xdfcffc00-0xdfcfffff irq 21 at device 29.7 on pci0
> ehci1: [ITHREAD]
> usbus7: EHCI version 1.0
> usbus7:<Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
> pcib4:<ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci4:<ACPI PCI bus> on pcib4
> vgapci0:<VGA-compatible display> mem
> 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at
> device 3.0 on pci4
> isab0:<PCI-ISA bridge> at device 31.0 on pci0
> isa0:<ISA bus> on isab0
> atapci0:<Intel ICH10 SATA300 controller> port
> 0xd8e0-0xd8e7,0xd8d0-0xd8d3,0xd8e8-0xd8ef,0xd8d4-0xd8d7,0xdc00-0xdc0f,0xdc10-0xdc1f
> irq 23 at device 31.2 on pci0
> atapci0: [ITHREAD]
> ata2:<ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3:<ATA channel 1> on atapci0
> ata3: [ITHREAD]
> atapci1:<Intel ICH10 SATA300 controller> port
> 0xd8f0-0xd8f7,0xd8d8-0xd8db,0xd8f8-0xd8ff,0xd8dc-0xd8df,0xdc20-0xdc2f,0xdc30-0xdc3f
> irq 22 at device 31.5 on pci0
> atapci1: [ITHREAD]
> ata4:<ATA channel 0> on atapci1
> ata4: [ITHREAD]
> ata5:<ATA channel 1> on atapci1
> ata5: [ITHREAD]
> atrtc0:<AT realtime clock> port 0x70-0x7f irq 8 on acpi0
> uart0:<16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart0: [FILTER]
> uart1:<16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> uart1: [FILTER]
> orm0:<ISA Option ROMs> at iomem
> 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff on isa0
> sc0:<System console> at flags 0x100 on isa0
> sc0: VGA<16 virtual consoles, flags=0x300>
> vga0:<Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atkbdc0:<Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0:<AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> est0:<Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 13
> device_attach: est0 attach returned 6
> p4tcc0:<CPU Frequency Thermal Control> on cpu0
> est1:<Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 13
> device_attach: est1 attach returned 6
> p4tcc1:<CPU Frequency Thermal Control> on cpu1
> est2:<Enhanced SpeedStep Frequency Control> on cpu2
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 13
> device_attach: est2 attach returned 6
> p4tcc2:<CPU Frequency Thermal Control> on cpu2
> est3:<Enhanced SpeedStep Frequency Control> on cpu3
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 13
> device_attach: est3 attach returned 6
> p4tcc3:<CPU Frequency Thermal Control> on cpu3
> est4:<Enhanced SpeedStep Frequency Control> on cpu4
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 13
> device_attach: est4 attach returned 6
> p4tcc4:<CPU Frequency Thermal Control> on cpu4
> est5:<Enhanced SpeedStep Frequency Control> on cpu5
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 13
> device_attach: est5 attach returned 6
> p4tcc5:<CPU Frequency Thermal Control> on cpu5
> est6:<Enhanced SpeedStep Frequency Control> on cpu6
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 13
> device_attach: est6 attach returned 6
> p4tcc6:<CPU Frequency Thermal Control> on cpu6
> est7:<Enhanced SpeedStep Frequency Control> on cpu7
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 13
> device_attach: est7 attach returned 6
> p4tcc7:<CPU Frequency Thermal Control> on cpu7
> Timecounters tick every 1.000 msec
> IPsec: Initialized Security Association Processing.
> ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based
> forwarding enabled, default to accept, logging disabled
> load_dn_sched dn_sched FIFO loaded
> load_dn_sched dn_sched PRIO loaded
> load_dn_sched dn_sched QFQ loaded
> load_dn_sched dn_sched RR loaded
> load_dn_sched dn_sched WF2Q+ loaded
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 480Mbps High Speed USB v2.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 12Mbps Full Speed USB v1.0
> usbus6: 12Mbps Full Speed USB v1.0
> usbus7: 480Mbps High Speed USB v2.0
> mpt0:vol0(mpt0:0:0): Settings ( Hot-Plug-Spares High-Priority-ReSync )
> mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
> mpt0:vol0(mpt0:0:0): 2 Members:
> (mpt0:1:9:0): Primary Online
> (mpt0:1:1:0): Secondary Online
> mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
> mpt0:vol0(mpt0:0:0): Status ( Enabled )
> (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
> (mpt0:vol0:1): Online
> (mpt0:vol0:0): Physical (mpt0:0:9:0), Pass-thru (mpt0:1:1:0)
> (mpt0:vol0:0): Online
> (xpt0:mpt0:1:-1:-1): rescan already queued
> ugen0.1:<Intel> at usbus0
> uhub0:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1:<Intel> at usbus1
> uhub1:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1:<Intel> at usbus2
> uhub2:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> ugen3.1:<Intel> at usbus3
> uhub3:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen4.1:<Intel> at usbus4
> uhub4:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1:<Intel> at usbus5
> uhub5:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> ugen6.1:<Intel> at usbus6
> uhub6:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> ugen7.1:<Intel> at usbus7
> uhub7:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub3: 2 ports with 2 removable, self powered
> uhub4: 2 ports with 2 removable, self powered
> uhub5: 2 ports with 2 removable, self powered
> uhub6: 2 ports with 2 removable, self powered
> uhub2: 4 ports with 4 removable, self powered
> uhub7: 4 ports with 4 removable, self powered
> acd0: DVDROM<TEAC DVD-ROM DV-28SW/R.2A> at ata4-master UDMA100 SATA 1.5Gb/s
> da0 at mpt0 bus 0 scbus0 target 0 lun 0
> da0:<Dell VIRTUAL DISK 1028> Fixed Direct Access SCSI-5 device
> da0: 300.000MB/s transfers
> da0: Command Queueing enabled
> da0: 139392MB (285474816 512 byte sectors: 255H 63S/T 17769C)
> ses0 at mpt0 bus 0 scbus0 target 8 lun 0
> ses0:<DP BACKPLANE 1.07> Fixed Enclosure Services SCSI-5 device
> ses0: 300.000MB/s transfers
> ses0: SCSI-3 SES Device
> pass2 at mpt0 bus 1 scbus1 target 0 lun 0
> pass2:<SEAGATE ST3146356SS HS10> Fixed Uninstalled SCSI-5 device
> pass2: 300.000MB/s transfers
> pass2: Command Queueing enabled
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #6 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #7 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #4 Launched!
> SMP: AP CPU #2 Launched!
> Root mount waiting for: usbus2
> ugen2.2:<vendor 0x0424> at usbus2
> uhub8:<vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on
> usbus2
> ugen0.2:<Avocent> at usbus0
> ukbd0:<EP1 Interrupt> on usbus0
> kbd2 at ukbd0
> ums0:<EP2 Interrupt> on usbus0
> ums0: 5 buttons and [XYZ] coordinates ID=1
> Root mount waiting for: usbus2
> uhub8: 4 ports with 4 removable, self powered
> Trying to mount root from ufs:/dev/da0s1a
>
>
>
>
> -----Mensagem Original-----
> From: Paulo Henrique BSD Brasil
> Sent: Monday, February 14, 2011 10:42 AM
> To: freebsd em fug.com.br
> Subject: Re: [FUG-BR] RES: OT: dica para hardware de servidor
>
> Então Eduardo, as duas Motherboards da SuperMicro são Dual Northbridges.
> Em pesquisa o Dell R610 apresenta compatibilidade com FreeBSD, pois tem
> uma empresa de Host em USA que dispôem de soluções comerciais sobre esse
> hardware e FreeBSD.
>
> Creio que o R710 tambem venha atender, mais o problemas de maquinas de
> grife é que são meio caixa preta para poder saber se a placa-mãe possui
> dois Northbridges.
>
> Mais quem tiver e diposnibilizar informações sobre eles.. sou agradecido..
>
> Att. Paulo Henrique.
> Em 14/2/2011 09:35, Eduardo Schoedler escreveu:
>> Escolha uma MoBo com 2 'northbridges', a performance fica melhor com
>> varias NICs.
>>
>> --
>> Eduardo Schoedler
>> Enviado via iPhone
>>
>> Em 13/02/2011, às 23:17, Paulo Henrique - YM<paulo.rddck em yahoo.com.br>
>> escreveu:
>>
>>> Estou analisando uma solução para roteador baseado em PC, contudo em um
>>> periodo muito breve o mesmo passará para roteador de borda,
>>> Receonheço quanto a compatibilidade da Supermicro com o FreeBSD, mas não
>>> vejo problema de ter certeza antes.
>>> A placa-mãe X8DAH+-F
>>> (http://www.supermicro.com/products/motherboard/QPI/5500/X8DAH_-F.cfm )
>>> ou a X8DAH+ (
>>> http://www.supermicro.com/products/motherboard/QPI/5500/X8DAH_.cfm )
>>> possui uma boa compatibilidade com o FreeBSD ?
>>>
>>> Uma outra opção seria Dell ou HP, contudo é meio caixa preta as
>>> especificações dos servidores, se alguem possuir informações de
>>> compatibilidade do FreeBSD em modelos dessas empresas e disponibilizar a
>>> serie ( melhor ser a configuração deles ) será de grande valia.
>>>
>>> Agradeço a atenção de todos.
>>>
>>> Att. Paulo Henrique.
>>>
>>> Em 29/12/2010 16:54, Bruno Torres Viana escreveu:
>>>> Senhores, não vamos perder o foco da thread.
>>>>
>>>> Em 29 de dezembro de 2010 16:22, Celso
>>>> Viana<celso.vianna em gmail.com>escreveu:
>>>>
>>>>>> MACBOOK PRO :D
>>>>>>
>>>>>> Frederico Boechat
>>>>>>
>>>>> Frederico,
>>>>>
>>>>> Esqueci de mencionar: PC com EFI...
>>>>>
>>>>> Thanks!!!
>>>>>
>>>>> --
>>>>> Celso Vianna
>>>>> BSD User: 51318
>>>>> http://www.bsdcounter.org
>>>>>
>>>>> 63 8404-8559
>>>>> Palmas/TO
>>>>> -------------------------
>>>>> Histórico: http://www.fug.com.br/historico/html/freebsd/
>>>>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
>>>>>
>>> -------------------------
>>> Histórico: http://www.fug.com.br/historico/html/freebsd/
>>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
>> -------------------------
>> Histórico: http://www.fug.com.br/historico/html/freebsd/
>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
> -------------------------
> Histórico: http://www.fug.com.br/historico/html/freebsd/
> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
>
> -------------------------
> Histórico: http://www.fug.com.br/historico/html/freebsd/
> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
Mais detalhes sobre a lista de discussão freebsd