[FUG-BR] FreeBSD 8.1 - HP NC107i PCIe Gigabit erro
Danilo Chilene
bicofino em gmail.com
Segunda Janeiro 31 13:49:54 BRST 2011
Boa tarde Senhores,
Alguém já presenciou este erro?
bge0: no memory for std Rx buffers
Lembrando que não está configurado jumbo frames ou device pooling, já
troquei switch e etc. A placa fica intermitente e simplesmente morre.
Abaixo o dmesg:
$ dmesg
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p2 #1: Wed Jan 26 01:51:01 EST 2011
root at FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8
amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz (2890.83-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106e5 Family = 6 Model = 1e Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 8235884544 (7854 MB)
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xffffffff80650da0, 0) error 1
ipw_bss: You need to read the LICENSE file in
/usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8046cb50, 0) error 1
ipw_ibss: You need to read the LICENSE file in
/usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1
in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8046cbf0, 0) error 1
wlan: mac acl policy registered
ipw_monitor: You need to read the LICENSE file in
/usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set
legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8046cc90, 0) error
1
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <HP ProLiant> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
bce0: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem
0xd4000000-0xd5ffffff irq 16 at device 0.0 on pci1
miibus0: <MII bus> on bce0
brgphy0: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce0: [ITHREAD]
bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Flags
(MSI)
bce1: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem
0xd6000000-0xd7ffffff irq 17 at device 0.1 on pci1
miibus1: <MII bus> on bce1
brgphy1: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce1: [ITHREAD]
bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Flags
(MSI)
pci0: <base peripheral> at device 8.0 (no driver attached)
pci0: <base peripheral> at device 8.1 (no driver attached)
pci0: <base peripheral> at device 8.2 (no driver attached)
pci0: <base peripheral> at device 8.3 (no driver attached)
pci0: <base peripheral> at device 16.0 (no driver attached)
pci0: <base peripheral> at device 16.1 (no driver attached)
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdcd01800-0xdcd01bff irq 16
at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci16: <ACPI PCI bus> on pcib2
bce2: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem
0xd8000000-0xd9ffffff irq 16 at device 0.0 on pci16
miibus2: <MII bus> on bce2
brgphy2: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce2: [ITHREAD]
bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2);
Flags (MSI)
bce3: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem
0xda000000-0xdbffffff irq 17 at device 0.1 on pci16
miibus3: <MII bus> on bce3
brgphy3: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce3: [ITHREAD]
bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2);
Flags (MSI)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci32: <ACPI PCI bus> on pcib3
bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem
0xdc900000-0xdc90ffff irq 16 at device 0.0 on pci32
miibus4: <MII bus> on bge0
brgphy4: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus4
brgphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: [FILTER]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci34: <ACPI PCI bus> on pcib4
bge1: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem
0xdca00000-0xdca0ffff irq 17 at device 0.0 on pci34
miibus5: <MII bus> on bge1
brgphy5: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus5
brgphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1: [FILTER]
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci36: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> mem
0xdd000000-0xddffffff,0xdc800000-0xdc803fff,0xdc000000-0xdc7fffff irq 18 at
device 0.0 on pci36
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci38: <ACPI PCI bus> on pcib6
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdcd01c00-0xdcd01fff irq 23
at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib7: <PCI-PCI bridge> at device 30.0 on pci0
pci48: <PCI bus> on pcib7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PCH SATA300 controller> port
0x1830-0x1837,0x1824-0x1827,0x1828-0x182f,0x1820-0x1823,0x1810-0x181f,0x1800-0x180f
irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel PCH SATA300 controller> port
0x1888-0x188f,0x183c-0x183f,0x1880-0x1887,0x1838-0x183b,0x1870-0x187f,0x1860-0x186f
irq 17 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xca000-0xcafff,0xdf000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd: unable to set the command byte.
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to set the command byte.
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 238475MB <VB0250EAVER HPG0> at ata2-master UDMA100 SATA 3Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ad6: 238475MB <VB0250EAVER HPG0> at ata3-master UDMA100 SATA 3Gb/s
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on
usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on
usbus1
acd0: DVDROM <DV-18S-A/B.0C> at ata4-master UDMA100 SATA 1.5Gb/s
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 <http://redmine.pfsense.org/issues/2> Launched!
SMP: AP CPU #4 <http://redmine.pfsense.org/issues/4> Launched!
SMP: AP CPU #6 <http://redmine.pfsense.org/issues/6> Launched!
SMP: AP CPU #3 <http://redmine.pfsense.org/issues/3> Launched!
SMP: AP CPU #7 <http://redmine.pfsense.org/issues/7> Launched!
SMP: AP CPU #5 <http://redmine.pfsense.org/issues/5> Launched!
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <Avocent> at usbus0
ukbd0: <EP1 Interrupt> on usbus0
kbd2 at ukbd0
ums0: <EP2 Interrupt> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=1
ugen1.3: <ServerEngines> at usbus1
ukbd1: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on
usbus1
kbd3 at ukbd1
ums1: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on
usbus1
ums1: 8 buttons and [XYZ] coordinates ID=0
Trying to mount root from ufs:/dev/ad4s1a
pflog0: promiscuous mode enabled
bge0: link state changed to UP
bge1: link state changed to DOWN
bce0: link state changed to UP
bce0: link state changed to DOWN
bce0: link state changed to UP
bge0: link state changed to DOWN
bge0: no memory for std Rx buffers.
bge0: no memory for std Rx buffers.
bge0: no memory for std Rx buffers.
bce0: link state changed to DOWN
bce1: link state changed to UP
bce1: link state changed to DOWN
bce3: link state changed to UP
bce3: link state changed to DOWN
bce2: link state changed to UP
bce2: link state changed to DOWN
bge0: link state changed to UP
bge0: link state changed to DOWN
bce0: link state changed to UP
bce3: link state changed to UP
bce3: link state changed to DOWN
bce3: link state changed to UP
bce2: link state changed to UP
bge0: link state changed to UP
bge1: no memory for std Rx buffers.
bge1: no memory for std Rx buffers.
bge1: no memory for std Rx buffers.
bge1: link state changed to UP
bge0: link state changed to DOWN
bge1: link state changed to DOWN
Mais detalhes sobre a lista de discussão freebsd