[FUGSPBR] mpd ppp com modem nec

[ronkot]

Ola',

Tenho um modem NEC GS-R250S configurado como pppoa bridge num servico adsl
da GVT. Testei o mpd e o pptp, conforme handbook nao consegui fazer
funcionar. Abaixo segue parte dos logs do mpd e ppp.

mpd.log
.......

mpd: pptp0: connecting to 192.168.7.1:1723
mpd: [adsl] device is now in state OPENING
mpd: pptp0: connected to 192.168.7.1:1723
mpd: pptp0: attached to connection with 192.168.7.1:1723
mpd: pptp0-0: outgoing call connected at 4927012 bps
mpd: [adsl] PPTP call successful
mpd: [adsl] device: UP event in state OPENING
mpd: [adsl] device is now in state UP
mpd: [adsl] link: UP event
mpd: [adsl] link: origination is local
mpd: [adsl] LCP: Up event
mpd: [adsl] LCP: state change Starting --> Req-Sent
mpd: [adsl] LCP: phase shift DEAD --> ESTABLISH
mpd: [adsl] LCP: SendConfigReq #61
mpd:  MRU 1500
mpd:  MAGICNUM 18892c94
mpd: [adsl] error writing len 18 frame to bypass: Permission denied
mpd: [adsl] LCP: SendConfigReq #62
mpd:  MRU 1500
mpd:  MAGICNUM 18892c94
mpd: [adsl] error writing len 18 frame to bypass: Permission denied
mpd: [adsl] LCP: SendConfigReq #63
mpd:  MRU 1500
mpd:  MAGICNUM 18892c94
mpd: [adsl] LCP: SendConfigReq #64

ppp.log
.......

ppp[240]: Phase: Using interface: tun0
ppp[240]: Phase: deflink: Created in closed state
ppp[240]: tun0: Command: adsl: set timeout 0
ppp[240]: tun0: Command: adsl: set authname 47xxxxxxxx em turbonetpro
ppp[240]: tun0: Command: adsl: set authkey ********
ppp[240]: tun0: Command: adsl: set ifaddr 0 0
ppp[240]: tun0: Command: adsl: add default HISADDR
ppp[240]: tun0: Command: adsl: enable dns
ppp[240]: tun0: Phase: PPP Started (direct mode).
ppp[240]: tun0: Phase: bundle: Establish
ppp[240]: tun0: Phase: deflink: closed -> opening
ppp[240]: tun0: Phase: deflink: Connected!
ppp[240]: tun0: Phase: deflink: opening -> carrier
ppp[240]: tun0: Phase: deflink: carrier -> lcp
ppp[240]: tun0: LCP: FSM: Using "deflink" as a transport
ppp[240]: tun0: LCP: deflink: State change Initial --> Closed
ppp[240]: tun0: LCP: deflink: State change Closed --> Stopped
ppp[240]: tun0: LCP: deflink: LayerStart
ppp[240]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped
ppp[240]: tun0: LCP:  ACFCOMP[2]
ppp[240]: tun0: LCP:  PROTOCOMP[2]
ppp[240]: tun0: LCP:  ACCMAP[6] 0x00000000
ppp[240]: tun0: LCP:  MRU[4] 1500
ppp[240]: tun0: LCP:  MAGICNUM[6] 0x3ff09322
ppp[240]: tun0: LCP: deflink: State change Stopped --> Req-Sent
ppp[240]: tun0: Phase: Signal 15, terminate.
tun0: LCP: deflink: SendTerminateReq(1) state = Req-Sent
ppp[240]: tun0: LCP: deflink: State change Req-Sent --> Closing
ppp[240]: tun0: Phase: deflink: read (0): Got zero bytes
ppp[240]: tun0: LCP: deflink: LayerFinish
ppp[240]: tun0: LCP: deflink: State change Closing --> Initial
ppp[240]: tun0: Phase: deflink: Disconnected!
ppp[240]: tun0: Phase: deflink: Connect time: 2 secs: 0 octets in, 69 octe
ppp[240]: tun0: Phase: deflink: 0 packets in, 2 packets out
ppp[240]: tun0: Phase:  total 34 bytes/sec, peak 0 bytes/sec on Fri Aug 20
ppp[240]: tun0: Phase: deflink: lcp -> closed
ppp[240]: tun0: Phase: bundle: Dead
ppp[240]: tun0: Phase: PPP Terminated (normal).

Alguma dica do que pode estar ocorrendo? Grato

Ronkot



_______________________________________________________________
Para enviar um novo email para a lista: fugspbr em fugspbr.org
Sair da Lista: http://lists.fugspbr.org/listinfo.cgi
Historico: http://www4.fugspbr.org/lista/html/FUG-BR/