[FUG-BR] Ajuda com Storage (HBA Qlogic 2312)
Marcus Alves Grando
marcus em corp.grupos.com.br
Qui Maio 4 11:30:32 BRT 2006
Muito estranho... Se está criado o volume e esta associado com o seu
servidor teria que reconhecer. Verifica no storage se está tudo correto
mesmo, pois eu ainda acho que não está associado a sua placa em algum
volume criado.
Manda o teu config do kernel.
Abraços
Mauro Felipe wrote:
> 2006/5/4, Marcus Alves Grando <marcus em corp.grupos.com.br
> <mailto:marcus em corp.grupos.com.br>>:
>
> Mauro,
>
> Você adicionou o ispfw no kernel ou carregou via kernel module?
>
> Eu coloquei no kernel :
> device isp
> device ispfw
>
>
> Via
> software da placa (bios), ela reconhece o storage?
>
>
> Não sei se ele está reconhecendo o storage, no dmesg não mostra nada a
> não ser as HBA's. O storage é um MSA1000 e no software que uso para
> falar qual unidade lógica vai ser apresentada para as HBA's, no caso
> desse servidor está com o status offline, mas a conexão está certinha e
> os leds estão verdes.
>
> Você liberou no
> storage para o ID da sua placa conectar e em qual partição?
>
>
> Eu liberei para ele conectar em um Logical Driver. Até o momento não
> existe nenhuma partição criada, somente a unidade lógica que eu
> disponibilizei para essas duas HBA's.
>
>
> Coloca isso no teu /boot/devices.hint
> hint.isp.0.topology="nport"
> hint.isp.0.debug="7"
>
> Depois manda o dmesg novamente
>
>
> DMESG depois do boot com a nova configuração do devices.hint:
>
> faraday# dmesg
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-RELEASE-p7 #0: Wed May 3 15:02:04 BRT 2006
> root em faraday.mct.gov.br:/usr/src/sys/i386/compile/FARADAY
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3047.93-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
>
> Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> Features2=0x4400<CNTX-ID,<b14>>
> Hyperthreading: 2 logical CPUs
> real memory = 2147459072 (2047 MB)
> avail memory = 2096488448 (1999 MB)
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <COMPAQ P29> on motherboard
> acpi0: Power Button (fixed)
> pci_link0: <ACPI PCI Link IUSB> on acpi0
> pci_link1: <ACPI PCI Link IN16> on acpi0
> pci_link2: <ACPI PCI Link IN17> on acpi0
> pci_link3: <ACPI PCI Link IN18> on acpi0
> pci_link4: <ACPI PCI Link IN19> on acpi0
> pci_link5: <ACPI PCI Link IN20> on acpi0
> pci_link6: <ACPI PCI Link IN21> on acpi0
> pci_link7: <ACPI PCI Link IN22> on acpi0
> pci_link8: <ACPI PCI Link IN23> on acpi0
> pci_link9: <ACPI PCI Link IN24> on acpi0
> pci_link10: <ACPI PCI Link IN25> on acpi0
> pci_link11: <ACPI PCI Link IN26> on acpi0
> pci_link12: <ACPI PCI Link IN27> on acpi0
> pci_link13: <ACPI PCI Link IN28> on acpi0
> pci_link14: <ACPI PCI Link IN29> on acpi0
> pci_link15: <ACPI PCI Link IN30> on acpi0
> pci_link16: <ACPI PCI Link IN31> on acpi0
> pci_link17: <ACPI PCI Link IN32> on acpi0
> pci_link18: <ACPI PCI Link IN33> on acpi0
> pci_link19: <ACPI PCI Link IN34> on acpi0
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <32-bit timer at 3.579545MHz > port 0x920-0x923 on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <display, VGA> at device 3.0 (no driver attached)
> pci0: <base peripheral> at device 4.0 (no driver attached)
> pci0: <base peripheral> at device 4.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 15.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <ServerWorks CSB5 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 15.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> ohci0: <OHCI (generic) USB controller> mem 0xf5ef0000-0xf5ef0fff irq 7
> at device 15.2 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> pcib1: <ACPI Host-PCI bridge> on acpi0
> pci1: <ACPI PCI bus> on pcib1
> ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem
> 0xf7bc0000-0xf7bfffff,0xf7af0000-0xf7af3fff irq 10 at device 3.0 on pci1
> ciss0: [GIANT-LOCKED]
> pcib2: <ACPI Host-PCI bridge> on acpi0
> pci2: <ACPI PCI bus> on pcib2
> bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
> 0xf7cf0000-0xf7cfffff irq 11 at device 1.0 on pci2
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> bge0: Ethernet address: 00:0e:7f:21:61:37
> bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
> 0xf7ce0000-0xf7ceffff irq 15 at device 2.0 on pci2
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> bge1: Ethernet address: 00:0e:7f:21:61:36
> pcib3: <ACPI Host-PCI bridge> on acpi0
> pci3: <ACPI PCI bus> on pcib3
> isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x4000-0x40ff mem
> 0xf7df0000-0xf7df0fff irq 15 at device 1.0 on pci3
> isp0: [GIANT-LOCKED]
> isp0: Board Type 2312, Chip Revision 0x2, loaded F/W Revision 3.3.6
> isp0: Installed in 64-Bit PCI slot
> isp0: 839 max I/O commands supported
> isp0: NVRAM Port WWN 0x210000e08b11c60d
> pcib4: <ACPI Host-PCI bridge> on acpi0
> pci6: <ACPI PCI bus> on pcib4
> isp1: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x5000-0x50ff mem
> 0xf7ff0000-0xf7ff0fff irq 11 at device 1.0 on pci6
> isp1: [GIANT-LOCKED]
> bge2: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem
> 0xf7fe0000-0xf7feffff irq 7 at device 2.0 on pci6
> bge2: Ethernet address: 00:08:02:28:4a:b9
> pci6: <base peripheral, PCI hot-plug controller> at device 30.0 (no
> driver attached)
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse Explorer, device ID 4
> sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem
> 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 3047929812 Hz quality 800
> Timecounters tick every 1.000 msec
> isp0: Point-to-Point mode
> isp0: Loop UP
> isp0: Port Database Changed
> isp0: Port Database Changed
> isp0: Firmware State <Config Wait->Ready>
> isp0: Target 126 (Loop 0x7e) Port ID 0xfffffe (role (none)) Arrived
> Port WWN 0x200800606951ac31
> Node WWN 0x100000606951ac31
> isp0: 2Gb link speed/s
> isp0: Loop ID 255, AL_PA 0x0, Port ID 0x10800, Loop State 0x2, Topology
> 'F Port'
> isp0: Target 255 (Loop 0xff) Port ID 0x10800 (role Initiator) Arrived
> Port WWN 0x210000e08b11c60d
> Node WWN 0x200000e08b11c60d
> acd0: CDRW <DW-224E/A.1K> at ata0-master PIO4
> da0 at ciss0 bus 0 target 0 lun 0
> da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-0 device
> da0: 135.168MB/s transfers
> da0: 69455MB (142245120 512 byte sectors: 255H 32S/T 17432C)
> Trying to mount root from ufs:/dev/da0s1a
>
>
> O camcontrol continua mostrando a mesma coisa.
>
> scbus0 on ciss0 bus 0:
> <COMPAQ RAID 5 VOLUME OK> at scbus0 target 0 lun 0 (pass0,da0)
> scbus1 on ciss0 bus 32:
> scbus2 on ciss0 bus 33:
> scbus3 on isp0 bus 0:
> < > at scbus3 target -1 lun -1 ()
> scbus4 on isp1 bus 0:
> < > at scbus4 target -1 lun -1 ()
> scbus-1 on xpt0 bus 0:
> < > at scbus-1 target -1 lun -1 (xpt0)
>
>
>
>
> --
> [ ]´s
>
> Mauro Felipe
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> freebsd mailing list
> freebsd em fug.com.br
> https://www.fug.com.br/mailman/listinfo/freebsd
--
Marcus Alves Grando
marcus(at)corp.grupos.com.br | Grupos Internet S/A
mnag(at)FreeBSD.org | FreeBSD.org
Mais detalhes sobre a lista de discussão freebsd